The I-330-C2
The popular I-330-C2, now has advanced Windows software and a fast
USB interface! It’s 2 differential channels for EMG, ECG, EEG, and 4 channels
for temperature, skin resistance, and respiration, provide power, flexibility
and functionality for a multitude of customized uses. J&J Engineering’s
new Windows software displays signals, provides feedback, collects data,
prints reports, and exports database compatible files.
J&J USB add-on is required if using Windows 2000 or Windows XP ($100)
I-330-C2 Series Comparison Chart >>
Features
- 2-person monitoring for ECG, HRV, Respiration, and Skin Resistance or Conductance
- 2 EMG channels with spectral and raw signal displays, 2 Skin Resistance and Conductance, 2 Temperature
- Displays the thoracic breathing component through upper body
placement of the EMG sensor
- ECG, EMG, 2 Respiration, Skin Resistance, Temperature.
- 2 EEG channels, Respiration, SR, Temperature
- Prints useful reports and exports database compatible files.
I-330-C2 Specifications:
Input Channels
Input Ranges
Input Impedance
Notch Filter
Maximum Bandpass
Max sampling rate per channel
I/O Format
Isolation, Optical
Amplifier Failure Protection
Static Discharge Protection
Power Source
Electrode Impedance Test
EMG Bandpasses
EEG Bandpass
EEG Artifact Detector
Heart Rate Bandpass
R Wave Filter & Detector
IBI or HR Output
Temperature Range
Skin Conductance Range
|
2 EMG, ECG, EEG & 4 SR, Temp, Resp.
±100 µV, ±500 µV, ±2000 µV
10 Gohm
50/60 Hz
1 to 400 Hz
1024 SPS
USB or RS232
4000VAC
50 µA maximum
+15,000V
4 x AA alkaline batteries
250 Ohm to 1 Mohm
100Hz to 400Hz, 20Hz to 400Hz
1 to 50Hz
30Hz to 100Hz RMS
1Hz to 400Hz
Single Beat Update
40 to 200 beats/minute
60° to 100°F (15° to 38°C)
1 to 100 µS
|
The new I-330-C2 Series
To go with our new software, our popular I-330-C2 design has been expanded into several new compact, lower-cost, special-use systems - the new I-330-C2 series. One of the most exciting of these new systems is the I-330-C2; C2-RF, a wireless physiology monitoring system perfect for those who need untethered monitoring and feedback. Our new I-330-C2; C2-GP is especially well suited to be a general purpose, educational starter system, and we have designed two streamlined specialty systems for EMG, and HRV breathing training which are being offered at very attractive prices.
Sensors To go with our new systems
we have designed new gel-free sensors for fast hookups with no
disposable costs. These sensors have a non-threatening, non-medical
appearance and are held on by comfortable flexible sports bands. They
are appealing to all ages and are especially nice for working with children.
The new software has been designed
with the needs of the clinician and researcher in mind and includes
integrated report generation, attractive feedback screens and flexible user
configuration. Screen features include automated operation for convenience
but, if you prefer, all automated presets can be easily clicked off so that
you have complete control over all features. Our new software is fully compatible
with all the newest Windows releases - Windows98, WindowsNT, Windows2000,
and WindowsME. New
Windows PhysioLab Software >>
System Requirements
On the product pages we have listed a recommended computer speed of 233MHz.
However, the need for processor speed is screen specific. We have
successfully run the system on 150 MHz laptops so, if you don't mind slightly
slower performance on the processor hungry spectral display screens, the
new Windows software and I-330-C2 series should run fine on slower systems, too.
Please see the next section on USB support to determine whether you should
use a USB adapter.
USB Support:
Our new hardware includes Universal Serial Bus (USB) support with an optional
USB adapter for simple Plug-and-Play installation. All of J&J’s
C2 class instruments now support USB (Universal Serial Bus). This development
is critically important since many new computers no longer support the COMM
port. USB provides a much faster interface, and our advanced Windows software’s
use of USB should greatly reduce installation problems. J&J designed
theUSB adaptor to work with standard Windows drivers for maximum compatibility.
Depending upon your hardware and which version of Windows you are using,
you can continue successfully to use the serial port or you may need to
purchase the USB adapter ($100) for seamless installation and compatibility.
|
Operating System
|
Serial COM Port
|
USB Adapter
|
|
Windows95
|
may work, not recommended
|
will not work
|
|
Windows98
|
works well
|
works well
|
|
WindowsME
|
works well
|
works well
|
|
WindowsNT
|
will not work
|
works well
|
|
Windows2000
|
will not work
|
works well
|
*Internet Software Available* J&J
Engineering software partner, TeleVital,
specializes in web-enabling biofeedback, and other physiological monitoring
devices, and provides the infrastructure that allows you to remotely
monitor, assess, and manage your client's physiology over the Internet.
As a biofeedback practitioner, you can use our I-330-C2, or any of the C-2
mini-series devices, which are all compatible with TeleVital’s
real-time, browser-based software.
TeleVital is working with experts
such as Dr. John Perry and Dr. Howard Glazer in the field of pelvic floor
muscle rehabilitation, and has recently web-enabled the urinary incontinence
and vulvodynia protocol, which is now available for your use. If you’d like
more information, an on-line demonstration, or would like to try their Internet-based
protocol at no obligation, please visit their website at:
TeleVital
J&J is comitted to maintaining the highest quality engineering
standards in all of its products in order to provide you with the
most accurate, artifact-free signals and the most reliable equipment available
anywhere. We are committed to innovation in order to provide you with
the latest state-of-the-art technologies used in creative, functional ways.
We are committed to value engineering in order to produce the most
streamlined economical designs possible in order to give you the best
value for your dollar.
|
